Netball Stand Instructions

Gilbert's Netball Stand is used by many people across Australia and New Zealand.

Here's the quickest way to set-up your Gilbert Netball Stand. 

STEP 1:

Insert the wheel rod through the base, the bottom pole and the wheels.

 

STEP 2:

Secure the support struts by attaching them to the base, and then to the bottom pole. Use the M8*20cm screws to attach struts to base and the M8*50cm bolt to fix into the pole.

STEP 3:

Assemble the stand pole by connecting each pole section together. Use the M8*45cm bolts for the next two poles.

STEP 4:

Before attaching the top pole, secure the ring to the plate on the top pole using the M6*16cm bolts. Next, attach net to the ring

STEP 5:

Attach the top pole with the ring using the M8*20cm bolt.

STEP 6:

Adjust ring height to either 8ft (2.4m) or 10ft (3.05m)